Today, I was handed two new articles to study. These articles had to do with the extraction of the red blood cells and then the NCP form the chicken blood.
The first one was named " Isolation of histones and nucleosome cores from mammalian cells". It summarized the extraction of the NCP from mammals but it was related to what we are doing with the chicken blood so I learned a few extra things.
The other article named " Salt induced transitions of chromatin core particles studied by tyrosine fluorescence anistropy" was actually where professor Andresen extracted our protocol for extracting the NCP from the chicken blood from. So far,I have learned the roles of the different buffer solutions and also the principles behind all the procedure. I will continue with this article and hope I finish reading it tomorrow .
Wednesday, June 22, 2011
Tuesday, June 21, 2011
W6D1
Today I spent most analyzing all three series of data from the three PEG series. Our collaborator, Xiangyun Qiu, was visiting for the day. In addition to providing insight into the results we have obtained, he also provide two more series without PEG to analyze. These series have 5mM Co with Mg from 0-50mM, and 10mM Co with Mg from 0-100. These series should nicely round our results from last summer, which looked at lower Co concentrations.
Week 6- Day 2
Today was more of a relaxed day as we made sure everything we set up was running well. First, we made sure the packing was running well and then Professor Andresen set up the nucleosomes to run in the gel. It should be done by tomorrow and hopefully the packing is done too so we could start running some tests.
Monday, June 20, 2011
Week 6 Day 1
Today was a mellow day for the Kiwi. The foreign factor were split for the first time today, Fash headed to the farm to harvest chicken blood and the used the centrifuge to isolate the red blood cells. I was left to tend the column that has been 3 days in the making now. The buffer solution is moving through the column so slowly that the lowest setting on the feeder pump still results in a 1cm per hour increase in the column. The day was made faster by reading papers on chromatin structure.
Week 6 - Day 1
Today we we met up with Professor Andresen's collaborator , Xiangyun Qiu, from George washington university , to go get some fresh chicken blood. We got the blood from a farm about 20 minutes away from a farmer named Beau Ramsburg.(I heard he makes good sausages.)Here is a link to his website.
http://www.rettlandfarm.com/.
We then got back to separate the red blood cells from the rest of the blood. We went through a long process centrifuging and extraction to finally get about 64mg of red blood cells from 400ml of chicken blood.
On the side, we made sure the packing we were preparing was running well and did not dry up.
Friday, June 17, 2011
W5D5
Today I ran all three concentrated series that I prepared yesterday. They yielded some interesting results. As the concentration of PEG increases, the amount of DNA precipitate remains somewhat constant, the Mg concentration decreases, and the amount of Co increases. This leads to high overcharging at low PEG concentrations, and around a total charge of 1 for the rest of the PEG concentrations. Looking further into this data should give us more information about the ions behavior.
W5D4
This morning, we gave our paper presentations. For the rest of the day, my main task was to prepare the remaining three trials for the latest series. I accidentally left calibration solutions out overnight, so I also had to remake those as well. Tomorrow I should be ready to run all of the three remaining series.
W5D3
Today I prepared and ran the first trial of the new series, which was precipitated in 2mM Co and 20mM Mg. Using the approximate concentrations I got from the dilute trial, I also made a new calibration standard. I will be able to analyze the results more tomorrow. I also spent some time today preparing for a paper presentation tomorrow, which I will be making on how osmotic pressure depends on DNA and ion concentrations in solution. They found that at low DNA concentrations, the ions in solution do affect osmotic pressure, but at high DNA concentrations, the concentration of DNA contributes more to the osmotic pressure.
Thursday, June 16, 2011
Week 5 day 4
I won't beat around the bush - Today was a lesson on why undergrads should not compound their mistakes. It began well with all processes inline to finalize the extraction of nucleosomes. However, I allowed the beaded solution to run too long, and it dried out. So at the beginning of the 3 hour processes to restore the solution, the delicate tube was cracked, setting us back even further. The only consolation was that the separation of the DNA experienced a set back, so there will be a chance to catch up tomorrow. Until then, time to read. Foreign factor out.
Week 5- Day 4
Today , things did not go as planned. First we discovered that the separation beads we left in the cold room had dried out. We had left the beads in the cold room with the intention of getting it ready for the NCP that was currently running through the gel. So we decided to re-run the beads but in doing that, we broke the tube in which the beads were in. As we quickly tried to retrieve what we could of the beading solution, Professor Andresen told us that the gel did not run properly and we would have to repeat it. This means that we have to wait till tomorrow to proceed with the NCP procedure. Tomorrow will be a better day!
Wednesday, June 15, 2011
Week 5- Day 3
Today, we continued with the extraction of the NCP from the chicken blood. We were able to get about 15mg in total and now the solution is sitting in an apparatus that uses gel to separate the DNA into base pairs with differences of 10.
Week 5 day 3
Today we continued the NCP prep. We found we had recruited around 15mg of NCP particles from the 3ml of chicken blood. Part of the NCP solution was then processed using different techniques to eliminate the protein core and is currently sitting in a gel apparatus that separates DNA chains by lengths of 10bp increments. Tomorrow the process should be completed.
Tuesday, June 14, 2011
Week 5 - Day 2
Today, we kicked off preparing a new sample of NCP right from scratch using the red blood cells from the chicken blood gotten from last year as the source. We decided to do this because of the abnormal test results we got from using the NCP solution from last year. A suggested explanation for the weird behavior in which the NCP did not aggregate was that the sample may have been mishandled which led to its damage. So we started with the long process of separating the NCP form the cells. We started of with the erythrocyte lysing, then the nuclei lysing and finally the nuclei digestion. We ran out of time mid way through the process but we will hopefully finish up tomorrow. Pictures of solution at different points of the extraction are shown above.
W5D2
Today I prepared and ran the other three trials of this second Tris and Mg series. When looking at the averaged results, there are several important things to note. First of all, there are several strange outlying points. In one sample, there was an abnormally large amount of magnesium. In two others, a strangely large amount of DNA precipitated, but there was little change in the ion concentrations. I will be looking more into what caused these random points. In general though, the results are very consistent and show an interesting pattern. As the PEG concentration is increased, the amount of DNA slowly decreases, and then towards the end it rapidly decreases. The Co and Mg concentrations stay fairly consistent over the range, which leads to a huge spike in contributed charges at the higher PEG concentrations. For the most part, the contributed charge by both ions adds up to around one, but when the spike occurs, the total goes up to above two. Some of this strange behavior could be coming from the comparatively large concentration of Tris?
W5D1
Today I prepared and ran a trial of the next series, which contains magnesium and Tris as well as cobalt. This also involved making another calibration series, with a slightly smaller range than the last one. These different ions in the solution should lead to some interesting effects.
W4D5
Today I analyzed the four concentrated trials I ran yesterday. Overall, there were a few interesting points that I found. Within the range of our error, there was no magnesium in any of the samples, which makes sense because none was added to begin with. There was a fairly consistent amount of Phosphorus (DNA) in all of the samples, which ranged between 500 and 600 ppb. In general, as the concentration of PEG was increased, more Cobalt was precipitated. Logically, this led to an increase in the charge contributed by the cobalt at higher PEG concentrations. At the highest PEG concentration, the charge contributed was around 1, which raises the question what was compensating for the charge at lower PEG concentrations.
week 5 day 2
Today we departed from the frustration of testing the aggregation abilities of old nucleosome samples and started from scratch. We are currently practicing the technique of NCP prep, or in other words extracting the nucleosomes from chicken blood. The process takes over a day, today being spent using a tris, NaCl, EDTA and PMSF solution and centrifugal techniques to reduce the chromosomes. However, an overnight process if chromatin dialysis is essential. So we will pick un tomorrow with chromatin.
week 5 day 1
Today resembled Friday. A re-run of Bertin's NCP aggregation was attempted, however, results did not resemble Bertin's. Large concentrations of Magnesium were approached in the NCP solution, however, no significant NCP was observed to be aggregating. One suggested problem was the sample was old and poorly handled, resulting in the essential tails of the NCP being degraded. Next week a better sample will be used.
Monday, June 13, 2011
Week 5- Day 1
Today, we repeated the same experiment we did last time in which we added MgCl to the solution of NCP so we can observe the reduction in concentration but we did not observe that. We decided to then make a new solution of NCP from chicken blood starting tomorrow and then we will repeat the experiment so we can spot out where we went wrong with it.
Friday, June 10, 2011
Week 4 Day 5
With yesterdays data in disagreement with Bertin's experiment, today was used to determine the reasons for these discrepancies. We began by adding surplus amounts of Magnesium to the solution in an attempt to see some form of NCP falling out of solution. This was to no avail as the solutions continually tested a similar concentration of NCP from UV vis spectrometer testing. The reasons why this experiment is not consistent remains unknown. Perhaps the Magnesium was incorrectly concentrated. The experiment may need to be performed again.
Week 4- Day 5
We added more magnesium to the NCP solution to see if aggregation occurs but after testing the concentration of the NCP after doing that, we found out that the concentration remained the same.. However this is not meant to be so. The addition of the magnesium salt should decrease the concentration of NCP in solution. We will look into this on Monday
Week 4 Day 4
Today was spent attempting to simulate Bertin's NCP aggregation experiments. Magnesium was repeatedly added to a 1mg/mL NCP solution at the increments indicated in the previous blog. Unusually, no significant change was observed in the NCP concentration as a result of Mg2+ addition to the level of 15mM. Futher investigation into the reasons behind this disagreement with Bertin's experiment will be perused tomorrow. The experiment may have to be repeated.
Week 4- Day 4
Today, we went ahead to perform the experiments with the solutions we prepared yesterday. We added amounts of magnesium to the NCP solution and then tested the concentration of the NCP in solution after each addition with the UV based spectrometer. The expected result was for the concentration of the NCP in solution to decrease because the magnesium should make some of the NCP aggregrate and fall out of solution. However this was not the case.So we decided to add higher concentrations of magnesium ton the NCP solution tomorrow and see what happens.
Thursday, June 9, 2011
W4D4
Today I looked over the results from yesterdays test. This time, I found that none of the samples contained magnesium, which is different from what the dilute series showed. Everything about this first test seemed very solid, so I made three more concentrated series to test. Together, these four series should provide a very accurate look as to how the ions behave in these samples. I will be able to compare them more tomorrow.
W4D3
Today I spent a very large amount of time making a very accurate calibration series. This involved double checking all of my solutions with an accurate scale to make sure the pipettes were being sufficiently accurate. Using this, I was able to able to measure very accurate amounts of the stock solutions, and make a much better series. In the afternoon, I made a concentrated set of DNA samples and ran them with my new series.
Week 4 - Day 3
Today, we prepared solutions in order to try to replicate Bertins experiment in which increasing concentrations of Mg are added to the nucleosome solution to see how the nucleosome aggregraates at the different concentrations.First we made a 10ml of a 1M solution of Magnesium chloride. Then we prepared the nucleosome solution by adding 67.2μL of the concentrated nucleosome to 10μL of 1M tris and then diluted the solution to 100μL with DI water. It is this solution we will add the magnesium chloride to while testing the concentration of NCP left in the solution after each addition using the UV based spectrometer shown above
Wednesday, June 8, 2011
Week 4 Day 3
Today was spent creating a protocol for the Bertin experiment and setting up the experiment, so come 9am the work can be pushed through. The experiment will consist of a 1mg/mL solution of NCP particles being immersed in an increasing concentration of Magnesium solution. The 12 different concentrations that will be measured and compared to the concentration of NCP particles will be approximately .2mM, .4, .6, .8, 1.3, 1.9, 2.6, 3.7, 4.9, 6.1, and 8.6.
The purpose of the experiment will be to compare the results to Bertin's results.
The purpose of the experiment will be to compare the results to Bertin's results.
Tuesday, June 7, 2011
Week 4- Day 2
Today, we went to check on the nucleosome solutions we left to filter in the cold room and found out that they were in good condition. We then sorted out the collected samples by figuring out which test tubes had the single and double nucleosomes in them. We then tested the samples containing the single nucleosomes to find out the concentration. We did this using a UV based spectrometer which I will show in my next post. After this, we concentrated the sample by using a centrifuge running at 5000g to collect only the nucleosomes from the solution. We tested the concentration of nucleosomes in the concentrated sample and found out that we lost roughly about 7% of the nucleosomes in the solution probably due to the filter in the centrifuge. But over all it was a good result.
W4D2
Today I spent the entire day looking at the results that I measured yesterday. There was a lot of information there, and it took some time to modify my spreadsheets from last summer. Two of the series displayed clear patterns, and one of them seems somewhat random. The series with a large concentration of Tris has a clear spike at higher concentrations of Tris. The series with a large concentration of Mg has a clear spike of Mg at lower concentrations of Tris. These patterns should be interesting to investigate with future trials. Tomorrow I will be making what will hopefully be a very accurate calibration series to run some concentrated trials.
W4D1
Today I spent the morning reading several articles on osmotic pressure. I am trying to get a better idea of the results I should expect from the new PEG series I am running. In these tests, the main variable that we will be testing is osmotic pressure. The best idea that I can build as of now is that osmotic pressure has to do with the concentrations of solutes in a solvent. It has several different definitions, depending on the context in which it is being used. The one that seems most relevant to our work is the energy density of solvent molecules. The idea that I am getting is that PEG takes up space in solution that used to be available to water.
I spent the afternoon running my three dilute series after the nitrogen arrived. I will be able to analyze these tomorrow.
I spent the afternoon running my three dilute series after the nitrogen arrived. I will be able to analyze these tomorrow.
Week 4 Day 2
Today we revisited last years NCP samples, from Xiangyun Qiu. The day began with a nervous visit to the cold room where we found a good set of UV data from a sample of NCP solution that was left to separate the night before. The picture to the right shows this sample, where particles in a solution were separated through a beaded solution by size. The high spike corresponds to the solution that contained the NCP. Using this graph we were able to pull about 50ml of NCP from the sample, a tone for the experiments we will be running in the future.
From here we centrifuged the NCP solution to create a highly concentrated solution of NCP. Tomorrow we will be using the sample to recreate Aurelie Bertin's experiments of observing the changing concentration of NCPs in varrying cation (Mg) solutions.
Monday, June 6, 2011
Week 4- Day 1
Today, we moved the UV monitor and the fraction collector down to the cold room in the science center so we could filter the nucleosome samples from last year using the chromatography I talked about early last week. We had to monitor the water level in the test tube and make sure it did not dry up so we could then add the nucleosome sample into the tube to start the process. Here are pictures of the apparatus
Friday, June 3, 2011
W3D4
This morning, we had a meeting to discuss both our goals for the next week, and a series of papers that we read. I presented the paper on osmotic pressure and viruses. For the rest of the day, I prepared myself to run the three new series next week when the gas tanks get here. I prepared dilute samples of all three series and a calibration series to go with them. On Monday, assuming the gas gets here on time, I will be able to get preliminary results for all of the new series.
Week 3-Day 4
Today, we were involved in various activities in the lab. First we kicked of the day with presentations on pre-chosen articles. I talked about the electrostatics that has to do with the nucleosomes in general from the article " DNA inspired electrostatics".
Next, we continued trying to figure out how the optimum level at which the water we feed into the "chromatography" test tube comes out at the other end at the same rate in order to prevent the "beads" from drying up.
Next, we prepared the stock solutions of the NaCl and Triz solutions. Professsor andresen showed us,using the NaCl, how to go about measuring the right mass of the solutes and also the correct way to dilute them with the solvent( water) and then finally how to filter any dirt from the solution. Ben and I then proceeded to do thesame for the Triz solute .
Lastly, we had to dilute the stock solutions we made to a 1 litre solution. We did our calcutations and verified with Professor Andresen before proceeding with the dilution. We are looking forward to next week when we get deeper in the research!!
Next, we continued trying to figure out how the optimum level at which the water we feed into the "chromatography" test tube comes out at the other end at the same rate in order to prevent the "beads" from drying up.
Next, we prepared the stock solutions of the NaCl and Triz solutions. Professsor andresen showed us,using the NaCl, how to go about measuring the right mass of the solutes and also the correct way to dilute them with the solvent( water) and then finally how to filter any dirt from the solution. Ben and I then proceeded to do thesame for the Triz solute .
Lastly, we had to dilute the stock solutions we made to a 1 litre solution. We did our calcutations and verified with Professor Andresen before proceeding with the dilution. We are looking forward to next week when we get deeper in the research!!
W3D3
Today we spent the morning preparing a talk to give the department describing the basic theory and motivation behind our work. We described how our work applies to the protein-DNA interactions that occur naturally in the body many times per second. Our work also can be used to package DNA in useful ways and facilitate its uptake into cells for gene therapy. I also spent a good deal of time reading over the paper I will present tomorrow on osmotic pressure's effect on virus DNA ejection. The virus system does not exactly apply to our work, but a lot of the concepts, including osmotic pressure and DNA-DNA interactions are very similar.
W3D2
Today I spent most of the day reading through the first half of Prof. Andresen's PhD thesis. His work uses anomalous small-angle x-ray scattering (ASAXS) to describe competition between different valence ions in the ion atmosphere surrounding DNA. I found his background of the basic biological theory behind the work especially useful, because it was laid out in a very clear manner. He also described the motivation behind the work we are doing, which was also very interesting.
Thursday, June 2, 2011
Week 3- Day 3
Today, We had a presentation where Ben,John and I explained what our research was about to all other students involved in research with other professors. We talked about the motivation of our respective researches.
I also had to prepare for our article presentation tommorow. The Andresen team all have to pick an article each and explain to the other members of the team. I picked the article " DNA inspired electrostatics"
Lastly, we finished working on the "packing" of the beads I talked about yesterday by making sure they did not dry up in the tube. I will post the picture of the apparatus used for better understanding .
I also had to prepare for our article presentation tommorow. The Andresen team all have to pick an article each and explain to the other members of the team. I picked the article " DNA inspired electrostatics"
Lastly, we finished working on the "packing" of the beads I talked about yesterday by making sure they did not dry up in the tube. I will post the picture of the apparatus used for better understanding .
Wednesday, June 1, 2011
Week 3- Day 2
Today, we had to improvise for a cord needed to run the UV monitor and the fraction collector. So we got our hands dirty with connecting wires and I also got to solder for the first time! The connection using the improvised cord worked as planned with some help form Prof Andresen. We also used a form of chromatograhpy to separate some mini beads from solution. We will use these beads later on to separate the single, double..etc chromosomes from one another and then analyze them using the fraction collector and the UV monitor.We also got familiar with the new labbelling device which we will use to label our test tubes from now on.
Tuesday, May 31, 2011
W3D1
Today I prepared a new calibration series, and some more DNA samples to run. We ran these samples under the supervision of a PerkinElmer tech, and took away some important lessons. We learned that altering the current through the plasma coil can give us higher counts for elements that require ionization. We also learned that slowing the flow of sample through the nebulizer will increase this effect. I prepared a new calibration series to run new PEG samples tomorrow.
Week 3 Day 1
After a memorial weekend of reading up on the theoretical models of the binding of cations to DNA, the lab took a day to tidy and read more on what the future holds. A lab tech came in to assess the OES and answer any questions we had. Hopefully getting our hands dirty in the lab tomorrow.
Week 3- Day 1
We had a technician show us better ways of using the spectrometer today. I also started reading another article named Electrostatic mechanism of chromatin folding which was written by David J. Clark and Takeshi Kimura.The article talked about the behavior of the nucleosomes in a salt solution of NaCl with the cations also present in the solution. It investigated the behavior with low and high concentrations of the salt solution and the DNA. With kurt back, we will soon kick into a higher gear in the research.
W2D5
Today I spent more time looking into papers on osmotic pressure. The first one I read was by Hansen et al, and it described a new way of looking at ions around DNA called the cell model formulation. This model is more accurate for determining osmotic pressure at low salt concentrations. It says that this "cell" acts as a neutralization volume for the counterions, and the electric field vanishes at the cell wall. Within the cell, the ions follow the PB equation. I also read another paper by Evilevitch (EVIL!) about DNA ejection from viruses. This paper suggested that PEG can be used to prevent the ejection of DNA from viruses. The use of smaller osmotic pressure changing molecules such as Glycol does not prevent the ejection of the DNA.
W2D4
Today I ran another competition between Ben and Fash, aiming to hone their pipette and calibrating skills. I also read a paper on DNA counterions. This paper suggested that counterions can contribute to the macroscopic properties of DNA solutions, such as osmotic pressure. It said that at High DNA concentrations, the counterion contribution to osmotic pressure prevails. Also, this paper suggested that there was a certain DNA/SAlt concentration range where osmotic pressure was proportional to the DNA concentrations, and independent of the salts.
Friday, May 27, 2011
Week 2- Day 5
Today, with Ben away in Phili,I went over the articles we read last week to further strengthen my knowledge in the biology of the research.
Thursday, May 26, 2011
Week 2- Day 4
Today, Ben and I wanted to become more familiar with pipetting,calibrating and operating the spectrometer in general. So we decided to compete in making solutions of Mg,Co and P of 0.05,2,4,6,and 8ppms.
We then ran random samples which John provided with our respective calibrations to see which ones matched better. Well, to cut the story short, I won!! Although I have to admit that my Mg calibrations were a bit off. We will be working more on our pipetting skills over the next few days.
We then ran random samples which John provided with our respective calibrations to see which ones matched better. Well, to cut the story short, I won!! Although I have to admit that my Mg calibrations were a bit off. We will be working more on our pipetting skills over the next few days.
Wednesday, May 25, 2011
W2D3
Today we began with some plans for aesthetic work to be done to masters hall. This involves a lot of poster renovation and updating. I then got out some leftover DNA samples from my work last summer for Ben and Fash to analyze. They used diluted versions of their calibration standards from yesterday to calibrate the spectrometer, and then attempted to determine the DNA and ion concentrations. We found that there was actually a few errors in their calibration series, but they were still able to obtain decent results. I also spent some time today educating myself on osmotic pressure, because many of the series I will be soon looking at deal with PEG and osmotic pressure. I found one article that suggested that divalent cations could cause attractive forces between DNA molecules under proper solution conditions. No such attractive forces were found with +1 ions.
W2D2
Today I prepared mystery solutions for Ben and Fash to identify using the spectrometer. These solutions had random amounts of Mg, Co and P that I had predetermined. I gave them some rough guidelines on what range my concentrations were in, which is around what we have when testing actual DNA samples. They made an accurate calibration series, and were able to identify the mystery solutions with very high accuracy. I also spent some time today looking over a lot of my results from last year, getting ready to start running actual DNA samples again.
Week 2- Day 3
Today, we ran solutions similar to the ones we did yesterday. The only was change was that we diluted the 1,2,4,6,8,10(ppm) solutions to 1,20,40,60,80,100(parts per billion(ppb)) respectively and then calibrated the spectrometer with them. Also , the samples we used this time were some of the DNA samples John used last year.
We also learned more about analyzing the results from the spectrometer. We noticed one point( the 80ppb) on the graphs were out of place. We probably added a little too much of Cobalt in the original 8ppm solutions we made yesterday. Otherwise, every other thing seemed pretty okay.
We also learned more about analyzing the results from the spectrometer. We noticed one point( the 80ppb) on the graphs were out of place. We probably added a little too much of Cobalt in the original 8ppm solutions we made yesterday. Otherwise, every other thing seemed pretty okay.
Week 2 - Day 3
Today the veteran put the foreign powers to the test by pulling out an old batch of DNA and left us alone to test the ions present in the solution. The foregin fact passed fairly sucessfully with most of the data corresponding to Johns previous tests. One of the calibrating solutions (80ppb) had a out lying concentration of Cobalt, which threw the calibration and results off a little. But all and all a good day, and feeling more comfortable using the equipment.
Tuesday, May 24, 2011
Week 2 - Day 2
Today,John "the veteran" made solutions of magnesium, cobalt and phosphorus of unknown concentrations and our task was to use results from the spectrometer to make good estimates of their concentrations. We started off by making calibrations of the same solution varying from 1ppm(parts per million) to 9ppm.
We then ran these calibrations in the machine along sides johns samples so we could use our calibrations to deduct the concentrations of his solutions. This was another opportunity for us to improve our pipetting skills. Ben taught me how to pipette properly after he noticed that I was unknowingly drawing out to much solution each time.
We ended up getting the right answers to the concentrations of johns mysterious solutions.We are looking forward to the next task.
We then ran these calibrations in the machine along sides johns samples so we could use our calibrations to deduct the concentrations of his solutions. This was another opportunity for us to improve our pipetting skills. Ben taught me how to pipette properly after he noticed that I was unknowingly drawing out to much solution each time.
We ended up getting the right answers to the concentrations of johns mysterious solutions.We are looking forward to the next task.
Monday, May 23, 2011
W2D1
Today we began with a lesson on chemical safety. After that, I gave a crash course of the basic chemistry that is required for our lab work. We then each prepared a set of samples, spanning from 1 to 10 ppm of Mg, Co and P. Using my set as the calibration, we tested the other sets for accuracy, and they were both very close, especially for first tries.
W1D5
Today I spent the morning brushing up on some reading, looking at a review article done by Bai, et al. This article described research very similar to my own, because they are also using spectroscopy to look at the ion atmosphere around Nucleic Acids. They did not use precipitated DNA though, rather they use a buffer equilibrium technique to preserve the atmosphere around the DNA. They found that the total ions around the DNA almost always was within error of exactly compensating for the DNAs negative charge. They also studied the competition between different molecules with similar charges, finding that bulkier polyions were often less competitive than the alkali and alkaline earth ions. I then spent the afternoon brushing up on my OES skills, preparing and running a test series and calibrations set.
Week 2 Day 1 - Experiments
As promised, learning the experimental ropes began today. It began with a crash course in stoichiometry, led by John, the student veteran of the Andresen lab. Once we had recalled the number crunching of high school chemistry, we were sent to the pipettes to create solutions of varying concentrations of Mg, P, and Co. We created these samples so we could be trained on the main machine of the lab, the Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). To quickly summaries what this machine does, it pumps solutions through a high temperature plasma, which blasts the molecules in solution apart and detects the resulting ions by analyzing the discrete wave lengths detected at different regions throughout the machine.
Using the ICP, we can send DNA on NCP molecules that have been bathed in different ionic solutions, we can detect the ions that attach themselves to molecules. It's important to note that the main error in the experiments comes from pipetting, so the Foreign Factor will be getting lots of practice on that, competitions galore.
Using the ICP, we can send DNA on NCP molecules that have been bathed in different ionic solutions, we can detect the ions that attach themselves to molecules. It's important to note that the main error in the experiments comes from pipetting, so the Foreign Factor will be getting lots of practice on that, competitions galore.
Week 2-Day 1
Kurt was not around today so John was in charge. We had a session on lab safety early on, to start the day. Jeremy Kumar gave us essential information on how to handle situations gone wrong in the lab and he gave us helpful information about appropriate lab behavior.
Next, John showed us how to prepare solutions of Cobalt, Magnesium and Phosphorus. We learned how to use the pipettes and brushed up our old school chemistry skills in stoichiometry as we calculated concentrations of solutions.
The most exciting part of the day was learning how to actually run the Spectrometer as John lead the way!!
Next, John showed us how to prepare solutions of Cobalt, Magnesium and Phosphorus. We learned how to use the pipettes and brushed up our old school chemistry skills in stoichiometry as we calculated concentrations of solutions.
The most exciting part of the day was learning how to actually run the Spectrometer as John lead the way!!
Friday, May 20, 2011
Day 4- Last day of reading
We rounded up reading the articles we had to cover today. We read the "Physics of Chromatin" article by Helmut Schiessel. This article was like an all round summary of all the other articles we read during the week. First , it talked about the structure of the Nucleosomes, then proceeded to say that DNA is packed in a way that the information would be easy to access even though it is packed in a complex way.
Next, we read about how an increase in ionic strength makes the DNA thicker and hydrogen bonding being responsible for the linking between the DNA- backbones and the histones surrounded by the DNA.
The paper also confirmed once more that counter ion release was responsible for overcharging. The paper ended by using a sphere ad chain model to explain the DNA and histone interaction in three different cases.
1) weakly charged
2) strongly charged and
3) physiological condition
Next, we read about how an increase in ionic strength makes the DNA thicker and hydrogen bonding being responsible for the linking between the DNA- backbones and the histones surrounded by the DNA.
The paper also confirmed once more that counter ion release was responsible for overcharging. The paper ended by using a sphere ad chain model to explain the DNA and histone interaction in three different cases.
1) weakly charged
2) strongly charged and
3) physiological condition
Day 4 - Last day of reading
With today being the last day of reading and next week the beginning of learning experimentation procedures, it seems appropriate to discus a few of the experiments we have read about during these past few reading days.
With certain aspects of these nucleosome structures fairly ambiguous, such as how they are packed along the genome, investigation into these uncertain aspects of nucleosome function is currently being looked into. The main work we have looked at is the paper, Structure and Phase Diagram of Nucleosome Core Particles Aggregated by Multivalent Cations, by Aurélie Bertin, Stéphanie Mangenot, Madalena Renouard, Dominique Durand, and Françoise Livolant, where they examined the behavior of NCP in various polyvalent ion solutions. The general trend was that when a solution of NCP had polyvalent ions added, the NCP rapidly fell out of solution. However, as more solution was added the NCPs went back into solution until it reached its original concentration, an unusual trend that that could suggest certain processes and structures of chromatin and NCP.
With certain aspects of these nucleosome structures fairly ambiguous, such as how they are packed along the genome, investigation into these uncertain aspects of nucleosome function is currently being looked into. The main work we have looked at is the paper, Structure and Phase Diagram of Nucleosome Core Particles Aggregated by Multivalent Cations, by Aurélie Bertin, Stéphanie Mangenot, Madalena Renouard, Dominique Durand, and Françoise Livolant, where they examined the behavior of NCP in various polyvalent ion solutions. The general trend was that when a solution of NCP had polyvalent ions added, the NCP rapidly fell out of solution. However, as more solution was added the NCPs went back into solution until it reached its original concentration, an unusual trend that that could suggest certain processes and structures of chromatin and NCP.
Thursday, May 19, 2011
Day 3
Ben has basically said all we did today at the lab and has given a little lecture on the Necleosome core particles(NCP),but i will add a little to that. I will explain a little about the experiment that was done on the NCP he talked about. As he said already, the NCP has a net negative charge and so the experiment involved adding two different cations ,namely a magnesium ion and a spermidine ion to a solution containing the NCP.These ions were added separately in two different experiments. The behavior of the NCP was observed as they precipitated when the ions were added but also came out in re-dissolution when the number of ions added reached a certain threshold. They used different concentrations of the NCP to see the different behaviors it will have. We learned that, the lower the concentration of the NCP was, the greater the interaction it had with the ions. We will keep you posted, but for now the second half of the international factor is out till tomorrow.
Day 3 - Nucleosome Core Particles (NCLs)
Today the foreign factor was churning through papers again, this time looking at prior experimentation done with Nucleosome Core Particles (NCLs). These publications are along the lines of the work us internationals will be doing around the lab, so as we know what its like to be in a strange land, for those of you who are foreign to NCLs, we'll turn this post into a lesson on NCLs and how they act in certain environments.

If you can imagine wrapping a thick string around a cylinder, that is a basic picture of an NCL, with DNA strands being the string and a histone octamer, or protein being the cylinder. As seen in the image to the right, the 'nucleosome' refers to this whole string and ball structure of a 146-147bp (base pair) DNA strand wrapped around the histone. This tiny structure (10nm) has a lesser negative charge than isolated DNA, due to the positive core, with an overall charge of -150. The nucleosomes can be thought of as the building blocks of chromosomes, as multiple nucleosomes can be wound together to form chromatin fibers, which be further arranged to form chromosomes. The reason we are interested in these nucleosomes is that due to the small, dense and complex structures, not much is known about the processes that compacts nucleosomes into chromatin fibers.
We'll let that information be absorbed and talk about experimentation tomorrow. Foreign factor gone.
If you can imagine wrapping a thick string around a cylinder, that is a basic picture of an NCL, with DNA strands being the string and a histone octamer, or protein being the cylinder. As seen in the image to the right, the 'nucleosome' refers to this whole string and ball structure of a 146-147bp (base pair) DNA strand wrapped around the histone. This tiny structure (10nm) has a lesser negative charge than isolated DNA, due to the positive core, with an overall charge of -150. The nucleosomes can be thought of as the building blocks of chromosomes, as multiple nucleosomes can be wound together to form chromatin fibers, which be further arranged to form chromosomes. The reason we are interested in these nucleosomes is that due to the small, dense and complex structures, not much is known about the processes that compacts nucleosomes into chromatin fibers.
We'll let that information be absorbed and talk about experimentation tomorrow. Foreign factor gone.
Wednesday, May 18, 2011
Day 2 - Studying continues
We moved on to different article that also tries to explain why the liked charged macroions/polyelectrolytes (DNA in particular) will want to stay attached together,in a condensed form ,when counterions are added to a solution in which they are in. We also learned ,from kurt, about the role that enthalpy and entropy play in this procedure. We learned about why the system as a whole chooses to preserve its entropy at the expense of its enthalpy by using its highest mutli-valent ion in the bonding process. I have learned a lot in just two days. It is going to be a great summer!!
Tuesday, May 17, 2011
first day of "freshmen year" once again!! But for research this time
Today, we basically had to catch up with the readings for research. We have a lot of fun stuff to read and get acquainted with, because the research involves a decent measure of biology. So I decided to get going with it right away and discover why two molecules(DNA) of the same charge will want to sit beside one another holding hands(be attracted to one another). They should be enemies according to the physics we all know. So to get to the bottom of this, Ben and I read our first article and then bombarded Kurt with all our uncertainties(there most always be uncertainties in labs right?)and he made them all clear. Tomorrow,we will be on to the next one.
p.s make sure you laugh at the uncertainty joke. Thanks
p.s make sure you laugh at the uncertainty joke. Thanks
Day 1 - Foreigners hit the books
With a summer theme of Bio-Physics, it would seem important for Fash and Benjamin (the Foreign factor of the lab), the young Nigerian and New Zealand aspiring physicist to brush up on the prefix (Bio). Currently, although we are well versed in physical ideas, such as electrostatic repulsion, Fash's and my biological knowledge doesn't extend further then a semester of bio 112; leaving us about as lost as we felt line dancing at the local rodeo last weekend (although Fash did suit his pink rodeo hat).
Today -- and most likely the remainder of the week -- will be dedicated to becoming acclimated with the biological and chemical content of the Andressen lab, and also getting a good grasp on prior work that has been conducted on the unusual properties of DNA.
From the literature we covered today (DNA-Inspired Electrostatics - W. Gilbert, Electrostatics of Strongly Charged Biological Polymers: Ion-Mediated Interactions and Self-Organization in Nucleic Acids and Proteins - G. Wong, L. Pollack) the interesting behavior of DNA came to the forefront of Fash and my bilingual discussions. Switching effortlessly between New Zealandish, English and American, we conversed about the theme of electrostatics. We agreed that one of the most striking aspects of DNA was its charge to length ratio. The long thin DNA coil contians one unit of negative fundamental charge every 0.17nm of length. Even more remarkable than this fact, are the experimental observations that despite the repulsive effects one might expect from such dense, like charge, the DNA attracts itself under a range of solution conditions. This was a recurring theme in the literature studied, with numerous theories including Poisson-Boltzmann Mean-Field Theory, presented in an attempt to explain this unintuitive phenomena.
Also applicable to the work we will be doing was the descriptions of how DNA acts in varying ionic solutions. When placed in "physiological conditions," (1MolL-1 NaCl) the DNA follows the shape of a coil, however, when placed in a highly dilute solution, the DNA forms into a torus (donut) shape with an average radius of 50nm. This resembles the experiments the foreign factor will most likely be looking into. However, instead of dealing with isolated DNA, we will be looking at how DNA, with nucleosomes still present within the structure, will act in varying solutions.
That seems like enough of an introduction, apologies for the accents, and until tomorrow, the Foreign half of team Andressen is out.
Today -- and most likely the remainder of the week -- will be dedicated to becoming acclimated with the biological and chemical content of the Andressen lab, and also getting a good grasp on prior work that has been conducted on the unusual properties of DNA.
From the literature we covered today (DNA-Inspired Electrostatics - W. Gilbert, Electrostatics of Strongly Charged Biological Polymers: Ion-Mediated Interactions and Self-Organization in Nucleic Acids and Proteins - G. Wong, L. Pollack) the interesting behavior of DNA came to the forefront of Fash and my bilingual discussions. Switching effortlessly between New Zealandish, English and American, we conversed about the theme of electrostatics. We agreed that one of the most striking aspects of DNA was its charge to length ratio. The long thin DNA coil contians one unit of negative fundamental charge every 0.17nm of length. Even more remarkable than this fact, are the experimental observations that despite the repulsive effects one might expect from such dense, like charge, the DNA attracts itself under a range of solution conditions. This was a recurring theme in the literature studied, with numerous theories including Poisson-Boltzmann Mean-Field Theory, presented in an attempt to explain this unintuitive phenomena.
Also applicable to the work we will be doing was the descriptions of how DNA acts in varying ionic solutions. When placed in "physiological conditions," (1MolL-1 NaCl) the DNA follows the shape of a coil, however, when placed in a highly dilute solution, the DNA forms into a torus (donut) shape with an average radius of 50nm. This resembles the experiments the foreign factor will most likely be looking into. However, instead of dealing with isolated DNA, we will be looking at how DNA, with nucleosomes still present within the structure, will act in varying solutions.
That seems like enough of an introduction, apologies for the accents, and until tomorrow, the Foreign half of team Andressen is out.
The Summer Begins Anew
In addition to helping them all with this work, I'll be working on a project that uses x-ray scattering to study these same nucleosomes. It should be a busy summer!
But with this talent and the wonderful resources available to us, we're ready for it!
Thursday, August 5, 2010
August 5th
Today I put the finishing touches on my presentation. I added a few graphs from the first series, and changed around a bunch of the slides. Other than that I just worked on an outline for my own benefit. After listening to Alex's presentation, I gave mine and received criticism on it. I still have some work to do on it, but it should be ready for my presentation in the spring.
August 4th
Wednesday, I spent pretty much the entire day working on my presentation. I have made a series of animated pictures that will help explain overcharging and the counter ion density wave theories. I also recruited the aid of Atwater Animations Inc. to help with some of the method slides. I think that over all, my presentation is really coming together.
August 3rd
On Tuesday, I finished up with my final analysis of the data for the second series. I calculated all of the averages a different way, one which I found to be a much better representation of the data. I got the concentrated series to agree very closely with the diluted trials, which is very promising. I also began updating my presentation for Thursday.
August 2nd
I spent most of Monday organizing and analyzing the data from the second series. This included looking through all of the raw data from all of the trials, and making sure there were no large problems with it. I also updated it to take into account the standard deviation of the mean.
Tuesday, August 3, 2010
Monday, August 2, 2010
July 29
Today I ran 2 digestions with the only difference being how much nuclease i put in each sample. In one i put a 10x dilution of our nuclease and in the other i put a 100x dilution. I kept everything else the same and used our old protocols to complete the digestion. On Monday we are going to run the gel because we have been kicked out of the chemistry department for the rest of the week.
July 29th
On Thursday, I made some new spreadsheets to analyze the data in a different way. I am trying to average the data in different ways, by averaging the values across the data series first. I think that doing this way is more accurate, because the trials are fairly consistent, and this helps to take into account where most of the error is coming from. This process seems to be making the data agree with itself more, which is promising.
July 28th
On Wednesday, I finished running the concentrated trials of the second series. I also reprocessed a few of the earlier trials, trying different calibrations. I discovered and correct one major problem, which was that I had run out of sample in one of the trials. This was throwing that trial way off, because it was taking values when there was no sample left. Reprocessing some of the data with different calibrations also helped make the data more consistent.
July 27th
On Tuesday, I continued to prepare and run the concentrated trials for the second series. So far things are going well, but the data is not quite matching up with the diluted trials. This could be because of the way I am analyzing the data, or also from problems and inconsistencies in the data itself.
Thursday, July 29, 2010
Many general lab updates
For our nucleosome project, we have had some setbacks, most of which we have recovered from. As you remember from last time, our column had broken. That is still the case and we are still waiting for a replacement as it is on back-order. What I had failed to mention was that the sample itself had also had some issues. Namely, there was a white powder that had precipitated out of the sample and to the bottom of the tube. This was disturbing as I was relatively sure that this was all of my nucleosomes aggregating and falling to the bottom of my tube (something they are only supposed to do when I want them to). Since we were stuck without column, I thought I would investigate this issue.
It turns out that nearly all of my nucleosomes had aggregated. After some investigation, it turns out that the nucleosome sample was actually in 10mM Calcium Chloride (a +2 ion) instead of 1mM. This is an issue because nucleosomes aggregate at about 5mM of +2 ions. It is also a problem because the EDTA we add to stop the digestion is added to stop 1mM of CaCl2, not 10mM.
The first thing I needed to do was get the nucleosomes back in solution. We did this by dialyzing the nucleosome solution (and the precipitate) with 150mM NaCl (a +1 ion). This is done by putting the nucleosome solution in a bag that only lets ions and water pass through it, but not the nucleosomes. It turns out, if you add enough +1 ions, they will displace the +2 ions at which point the nucleosome should go back into solution. After a day of dialysis, we had significantly increased the amount of nucleosomes in our solution. After a weekend of dialysis, we had gotten back basically all of our nucleosomes. Now we had to make sure that they had been digested correctly (especially checking for over-digestion which shows up as smearing on our gel).
The results look like this. Now the furthest column to the right is our DNA ladder. This is used to let us know how long our DNA is. You match the known length of the ladder band to your sample. The bright band at the bottom is a 100 base pair DNA. Each step "up the ladder" is a 10 base pair step (110 base pair, 120 base pair, etc). The lane immediately to the left of the ladder is our sample. If you look and count carefully, you can see that it lies between the 140 base pair and 150 base pair "steps" of the ladder. This is perfect as the DNA should be 146 base pairs! Even better, there is no "smearing" to lower parts of the gel, which would indicate over digestion. You can see an example of this in a different sample that was run in the lane immediately to the left of our sample.
So as a wrap-up, we have the same amount of nucleosome we started with, all in solution and digested to the correct length. All that is left to do is to separate out any small amounts of double or triple or larger nucleosome arrays and we will be done. Since we are still waiting for our column to arrive, we may end up doing this through a sucrose gradient instead.
Not to be shown up, John is busy plowing through the ton of data that he has taken. Now that we have all of the data, we need to figure out why some of it looks great and some of it looks not-so-great. Things looked pretty bad at the beginning of this process, but each time I check in with him, he seems to have found another correction to make the data fall in line. If all goes well, we'll have it all whipped into shape by the end of this week.
It turns out that nearly all of my nucleosomes had aggregated. After some investigation, it turns out that the nucleosome sample was actually in 10mM Calcium Chloride (a +2 ion) instead of 1mM. This is an issue because nucleosomes aggregate at about 5mM of +2 ions. It is also a problem because the EDTA we add to stop the digestion is added to stop 1mM of CaCl2, not 10mM.
The first thing I needed to do was get the nucleosomes back in solution. We did this by dialyzing the nucleosome solution (and the precipitate) with 150mM NaCl (a +1 ion). This is done by putting the nucleosome solution in a bag that only lets ions and water pass through it, but not the nucleosomes. It turns out, if you add enough +1 ions, they will displace the +2 ions at which point the nucleosome should go back into solution. After a day of dialysis, we had significantly increased the amount of nucleosomes in our solution. After a weekend of dialysis, we had gotten back basically all of our nucleosomes. Now we had to make sure that they had been digested correctly (especially checking for over-digestion which shows up as smearing on our gel).
The results look like this. Now the furthest column to the right is our DNA ladder. This is used to let us know how long our DNA is. You match the known length of the ladder band to your sample. The bright band at the bottom is a 100 base pair DNA. Each step "up the ladder" is a 10 base pair step (110 base pair, 120 base pair, etc). The lane immediately to the left of the ladder is our sample. If you look and count carefully, you can see that it lies between the 140 base pair and 150 base pair "steps" of the ladder. This is perfect as the DNA should be 146 base pairs! Even better, there is no "smearing" to lower parts of the gel, which would indicate over digestion. You can see an example of this in a different sample that was run in the lane immediately to the left of our sample.
So as a wrap-up, we have the same amount of nucleosome we started with, all in solution and digested to the correct length. All that is left to do is to separate out any small amounts of double or triple or larger nucleosome arrays and we will be done. Since we are still waiting for our column to arrive, we may end up doing this through a sucrose gradient instead.
Not to be shown up, John is busy plowing through the ton of data that he has taken. Now that we have all of the data, we need to figure out why some of it looks great and some of it looks not-so-great. Things looked pretty bad at the beginning of this process, but each time I check in with him, he seems to have found another correction to make the data fall in line. If all goes well, we'll have it all whipped into shape by the end of this week.
Tuesday, July 27, 2010
July 27
Today I ran tests on the Lambda 25 to see if it is properly working, and it passed all the tests I could do without having to make any samples. I also created an instruction sheet for the machine with the basics so that anyone can now use it.
Monday, July 26, 2010
July 26th
Today I made and ran a second series of concentrated samples for the first series. The results came out somewhere in between the diluted series and the first concentrated series that I ran. This is promising, because the results should all be the same. It is possible that there is some sort of concentration dependent interference that is happening, which could be causing some of the differences. Today, I decided to start running concentrated trials of the second series, and started preparing the samples. This should be easier because there is much more of the second series left. Overall, I am finding that the eighth and tenth points are still uncharacteristically high, which leaves me to believe it is something in the actual sample preparation. This is one of the only explanations I can see left, because I have ruled out most of the possible problems on the testing end. One possible explanation is that not all of the Mg buffer solution was removed when the DNA precipitated.
July 23rd
Today, I wrote the second of two results reports, and updated all the graphs for the second series. It was Matt and Andrew's last days, so we had their final presentations today as well.
July 22nd
On Thursday, I began by analyzing the concentrated trial for the first series. It came out to be significantly lower than the eight diluted trials I had run previously. By lower, I mean the the normalized concentrations for the concentrated trial should have been the same as the diluted trials, but they were consistently below the diluted trials. This was kind of disturbing, and has prompted me to run more concentrated trials. I also updated my results report, and fixed and updated all of the graphs that I have been creating. I also consolidated and organized all of my data and graphs.
Thursday, July 22, 2010
July 21st
Yesterday, I started by running the last trial of the second series. I also prepared a few more tests and ran them as well. The first was a new test for chlorine, which worked slightly better than the first. Part of the problem was that I didn't prepare the NaCl standard quite right, but some of the results still come out negative. I also ran some of the Chromatin that the professor and Travis have been working on, and found that it had higher calcium concentrations than they expected. I also designed and ran a highly concentrated series of the first series. This should help identify what is actually going on in the last few samples of each trial. They have been fairly random, but almost always are way above where I would think they should be. This is attributable to the fact that are very low concentrations of all of the elements. This makes sense, because less DNA is precipitating.
July 20th
On Tuesday, I continued to run the second series of samples, and I finished all but one of the eight trials. I also began to look at the spectrometer's ability to analyze chlorine in samples. This will be useful because it is possible that the cobalt hexamine ions are not completely dissociating. What this means, is that some of the cobalt ions we would expect to be +3 will actually be behaving as +2. Knowing the exact concentration of Cl would allow us to see if all of the ions were dissociating. Unfortunately, my first results came out very strange, with the chlorine concentrations going negative for a lot of the values.
July 21
Yesterday I spent the morning looking through the spectrometers manuals trying to figure out why the results we are getting are so weird. While doing and alignment i put our sample container into its slot and noticed that only a small amount of light was going through the sample compartment and the rest was just going over it. So the professor re-ajusted the holder and I ran another trial on matt and andrews red and purple solutions and got better results than the first time. I also re-ran the collaborators chromatin and got its absorbance to be 3 times what it was when i ran it the first time.
Tuesday, July 20, 2010
July 19th
Yesterday, I continued the testing on the second series of samples. I prepared three more trials, and tested four of them. I also began analyzing the first few trials that I have run. I've found that the ends of the series, near 45mM Mg have final concentrations that are very low, near 1-2 ppb, which is very hard to measure. While this results can still be used, it is possible that they are inaccurate. I also started correcting and adding more graphs to my report. I am adding some total charge and final concentration graphs. Due to the low concentrations, I am going to look at designing a concentrated trial today.
Friday, July 16, 2010
July 16th
Today I prepared the next three trials for the second series, and ran two of them. Everything is going well so far. One thing that I am considering is running a trial at a higher concentration. I think it would be interesting to see if only diluting the solution to 50X or 20X had any effect on the results. I think part of the reason that the results are going so wacky for the higher concentrations of initial magnesium is that the precipitated DNA concentration is so low. I think that running it at a higher concentration would help get accurate data for the higher points. Unfortunately, we don't have enough sample right now to do this several times, so I will have to plan it carefully to conserve sample. We also had our meeting updating everyone on progress, and also describing some of the work we still need to do.
July 15th
Yesterday, I ran the first trial of the next series. This series goes from 0 mM to 45 mM initial Mg concentration. As I looked at the results from this first trial, I was glad to see it closely resembled the appropriate part of the first set of trials, which went up to 22.5 mM. The last few points, towards the higher concentrations, and further trials should help see what is going on there. I also reviewed my results report for the first series, and updated all of the graphs. Unfortunately, we found an error in how I was calculating the errors in the measurements. Due to the way I uses excel spreadsheets repeatedly, this error was in all of the data I have analyzed so far. I was able to track down all of the repeated mistakes, and I believe my analysis is no more accurate.
Past few days
Basically in a nut shell we did another trial digestion using .1 microliters of nuclease instead of 1 microliter and we got the best results to date. We took our data and determined that we would get the best samples with a 20 minute digestion so we did a digestion on the rest of our chromatin. We set up our size separator in the cold room and as we were pouring in the chromatin the professor noticed that our tube had dried out making it useless, so we quickly poured our DNA out and lost a fair bit and then took the tube back to the lab to clean it out. However, during the cleaning we didn't use a Styrofoam sleeve to protect the glass and accidentally over tightened and broke our tube, so now we are at a stand still waiting for new materials. With my free time i have worked a lot on the website and did quite a fair bit of reading. Today I took the scatchard plot of the nucleosomes from a similar experiment to ours and used a program to scale and choose each of the points to figure out what their actual locations are and then turned it into a read-able graph that we will look at on Monday.
Thursday, July 15, 2010
Great Successes and Amazing Failure
A lot has happened since I last posted. Let's start with the positive.
We have successfully run a very nice non-denaturing poly-acrylamide gel. The key was to increase the amount of sucrose in or loading solutions. This helped minimize diffusion of the samples before they started running. Another thing that helped was a mistake I made. In my haste to make the gel, I accidentally inserted a 10-well comb rather than a 15-well comb. However, this actually resulted in much nicer results.
We see exactly what we would like. The first column is our normal DNA ladder. The second is the undigested chromatin. As you can see, it is all at the top of the gel. Then we start digesting. As we go to the right, the time of digestion is increasing. As you can see, by the sixth column or so, the size doesn't change much for a few columns. This is the digestion being stopped right at the nucleosome core. After a bit of time, however, the digestion proceeds past this point in some of the nucleosomes, digesting the DNA that is around the core. That is why the gels get smeared towards the bottom for the last three columns. When we do our final digestion, we will make sure that we don't let it digest this long.
After this great success, we digested one of our samples and were going to pass it through our size-exclusion chromatography column. This column will separate our sample by size. This will allow us to collect all of the nucleosomes that are the exactly correct size, while ignoring those too big or anything that is too small (bits of DNA, etc.). The setup is shown to the right.
One thing about a size-exclusion column is that it must never dry out. The tricky thing is that you need it to almost dry out to add your sample so that your sample stays relatively concentrated in the gel. To make a long story short, I brought the column to the almost dry level and the closed the valve. However, the valve leaked slightly and after 15 minutes, when we loaded the sample, I noticed the gel had completely dried out.
At this point we needed to recover the sample (which we did right away). We then took the column back to the lab to recover the media (the white stuff in the column) so we could rehydrate and repack the column. During this process, I overtightened the column in the vise that was holding it. So now we are waiting on a replacement column and replacement media. It's funny how much a small leaky valve and 15 minutes can change things.
We have successfully run a very nice non-denaturing poly-acrylamide gel. The key was to increase the amount of sucrose in or loading solutions. This helped minimize diffusion of the samples before they started running. Another thing that helped was a mistake I made. In my haste to make the gel, I accidentally inserted a 10-well comb rather than a 15-well comb. However, this actually resulted in much nicer results.
We see exactly what we would like. The first column is our normal DNA ladder. The second is the undigested chromatin. As you can see, it is all at the top of the gel. Then we start digesting. As we go to the right, the time of digestion is increasing. As you can see, by the sixth column or so, the size doesn't change much for a few columns. This is the digestion being stopped right at the nucleosome core. After a bit of time, however, the digestion proceeds past this point in some of the nucleosomes, digesting the DNA that is around the core. That is why the gels get smeared towards the bottom for the last three columns. When we do our final digestion, we will make sure that we don't let it digest this long.
After this great success, we digested one of our samples and were going to pass it through our size-exclusion chromatography column. This column will separate our sample by size. This will allow us to collect all of the nucleosomes that are the exactly correct size, while ignoring those too big or anything that is too small (bits of DNA, etc.). The setup is shown to the right.
One thing about a size-exclusion column is that it must never dry out. The tricky thing is that you need it to almost dry out to add your sample so that your sample stays relatively concentrated in the gel. To make a long story short, I brought the column to the almost dry level and the closed the valve. However, the valve leaked slightly and after 15 minutes, when we loaded the sample, I noticed the gel had completely dried out.
Wednesday, July 14, 2010
July 14th
Today, I had the Spectrometer running the entire day, and I made it through all 4 trials that I wanted to run. So far, I have found all of the results to be fairly consistent with my first set of four trials, which is good news. I think that the new calibration standard may have helped to lessen the extreme errors I was getting with the eighth and tenth points. All together, I now have 8 trials that I can include in my report of my results so far. This should give us a very good idea of the patterns of the ion concentrations. Tomorrow, I am going to start preparing the second series, which is also a magnesium series. The second series goes from 0 to 45 mM Mg. I will also being finishing up my report of my work so far, which I will probably be putting up on here. Travis and I have been putting together a website that summarizes the work that we are doing, which can be seen here: www.gburgsummerphysics.webs.com. This will be a good overall explanation of the theories and processes involved.
July 13th
Yesterday, I analyzed the final of four initial sample tests that I have been running. It came out to be similar to the other three trails, which is good for consistency. I will now be moving on to the next set of trials for this first set of samples, which I expect to be even more accurate. Using a better calibration standard should make this set of data more reliable. I also tested my new calibration standards, and found that they worked quite well. After diluting each one to the proper concentration, I am left with about 80 test tubes just waiting to be tested, which I should hopefully be able to finish tomorrow.
Tuesday, July 13, 2010
July 12th
Yesterday morning, I read two different articles. One was about DNA stretching, and the other was about incomplete ion dissociation. The DNA stretching article was not as relevant as I had hoped, but it was still interesting. It was about a statistical mechanical model for the condensing of DNA under tension. It was based on data similar to that which I am collecting, on the condensing of DNA in the presence of Cohex. It gave approximate values for the tension present when DNA collapses. The second article provided another theory as to why the DNA would condense and the resolubize under increasing amounts of Cohex. It suggests that as the concentration increases, not all of the Cl- leaves the Cohex, so there are increasing concentrations of Cohex+2 instead of the normal +3. This would mean that the Cohex is actually out-competing itself, causing the DNA to return to solution. It is possible that our results could be supporting this theory, although it is hard to tell without the Cl- concentration. This is unfortunately impossible to get because the solution was flooded with NaCl to resolubize the DNA. In the afternoon, the nitrogen finally got here, and I was able to resume testing. The first thing that I tested was the fourth of four initial runs that I did on the real sample.
Monday, July 12, 2010
July 9
On Friday I spent the day preparing another trial digestion this time using .1 micro liters of nuclease instead of 1 micro liter. Because our previous gels showed our digestion ending very quickly we decided that we were adding too much nuclease making the whole process end after around 5 minutes. So I did another 50 minute digestion and made a 10X dilution. I also did a digestion on the collaborators nucleosomes using the same method. For these samples we also added a lot more sucrose than before also in higher concentration. The professor hopes that this will make our gels much more readable then they have been.
Friday, July 9, 2010
July 9th
Today, I spent pretty much all day making new samples to test. I was anticipating getting the new nitrogen tank today, which would let me run some of these samples, but it hasn't come yet. I have two new calibration standards, which are both designed to span the exact range I'll be working with. They are both the same thing, but prepared twice just to make sure that sample preparation doesn't have anything to do with the results. I also prepared these calibration standards to be tested for accuracy as well, by separating them into additional tubes. I also diluted the DNA samples into 4 different sets, each of which are 100X dilutions. Today, the professor gave me a paper that has possible applications to our project. The paper suggest that some of the Cohex did not completely dissociate in the original solution, making some of them +2 ions. This would help explain why our results are significantly higher than the existing PB theory would suggest.
July 8th
Yesterday, I worked on analyzing the data in a few more different ways. I separated the data so that it showed just the average Mg, Co and P concentration. This helped me to explain why two of the points don't fit in my contributed charge graphs. This is a combined effect from the Mg and Co values being higher and the overall DNA (P) concentration was lower. I also started to design and make the next huge set of samples that I will be testing when we get more nitrogen.
Thursday, July 8, 2010
And more DNA gels
Well, we keep getting better at least. This digestion showed a much better digestion. As you can see, the 0 minute digestion showed a smear of DNA, while all lanes that were digested for 5 minutes or more showed a nice single band that can be believed to be around 146bp. As can be seen we have a few issues.
First, the digestion is supposed to take around 30 minutes. This is helpful because it means that you can make sure that you are just digesting to 146bp and not overdigesting. Ours is taking 5 minutes. In our next digestion, we'll try decreasing the amount of nuclease (the thing that "eats" the DNA) by a factor of 10. Hopefully we'll then see a little more of a progression and less of a step function.
The second issue is that the gel still doesn't look great. The first issue is the ladder. We obviously didn't run long enough: Our 100bp standard only went about 1/2-way down the gel. However, conditions were controlled enough the last time that we should be able to have a nearly-perfectly timed run.
The other issue with the gel is that the DNA in all but the ladder lane is quite diffuse. It would be much easier to read if they looked like lines, similar to the ladder in previous gels. My theory is that this is due to the sample not being dense enough when loaded and therefore diffusing before it starts running in the gel. An easy fix for this will be to increase the amount of sucrose before loading these samples.
Finally, a problem with the gels that I'm not showing you is that I messed up the loading of the other gel. This is actually Travis's gel. Mine didn't have a ladder! Well, I'll have to do better next time.
Things with John's project are going quite well as you can see by his posts. We should have nitrogen tomorrow which will allow him to run more samples. After that starts up, we should be on our way to having all of the DNA aggregation samples done by the end of next week if everything goes well.
First, the digestion is supposed to take around 30 minutes. This is helpful because it means that you can make sure that you are just digesting to 146bp and not overdigesting. Ours is taking 5 minutes. In our next digestion, we'll try decreasing the amount of nuclease (the thing that "eats" the DNA) by a factor of 10. Hopefully we'll then see a little more of a progression and less of a step function.
The second issue is that the gel still doesn't look great. The first issue is the ladder. We obviously didn't run long enough: Our 100bp standard only went about 1/2-way down the gel. However, conditions were controlled enough the last time that we should be able to have a nearly-perfectly timed run.
The other issue with the gel is that the DNA in all but the ladder lane is quite diffuse. It would be much easier to read if they looked like lines, similar to the ladder in previous gels. My theory is that this is due to the sample not being dense enough when loaded and therefore diffusing before it starts running in the gel. An easy fix for this will be to increase the amount of sucrose before loading these samples.
Finally, a problem with the gels that I'm not showing you is that I messed up the loading of the other gel. This is actually Travis's gel. Mine didn't have a ladder! Well, I'll have to do better next time.
Things with John's project are going quite well as you can see by his posts. We should have nitrogen tomorrow which will allow him to run more samples. After that starts up, we should be on our way to having all of the DNA aggregation samples done by the end of next week if everything goes well.
July 7th
Yesterday I spent most of the day reformatting the data that I have already collected. Instead of comparing the results across the different trials that I have run, I compared the results across the different collection methods the spectrometer uses. This gave me three more sets to compare, the Radial view and the two Axial views. This took a lot of manipulating the data, because everything I have done prior has been set up to compare different sets. Fortunately though, the end result was that I confirmed all three methods are equally valid. This means that I can keep using all three sets of data without fear of one of them being massively inaccurate.
Wednesday, July 7, 2010
July 7
Today we poured and ran our DNA gels.. the professor put in the concentrated samples and I put in our 10X dilution samples. To get the samples in the gel we had to take a pipette and slowly inject the solution into the wells in the DNA gels... After a while this gets difficult because you really have no room to mess up because if you go side to side you can mess up the wells and if you go to far down you can puncture the gel. But I finally got the hang of it and after some time we were able start our gel at 10V. The professor decided to use a power supply from the physics department because last time when we used the power supply that is in the lab it shut down during the night and messed up our results.
July 6
Today I ran another timed digestion going up to the usual 50 minutes. I created a 10x dilution of each sample and also made a sample of the old nucleosomes we had in the freezer by adding just enough to make the concentrations of the new nucleosomes samples and the old sample equal. tomorrow we are going to run the DNA gel which will probably run overnight.
Tuesday, July 6, 2010
July 6th

Unfortunately, the spectrometer ran out of nitrogen over the long weekend and we won't be able to replace it for a few days. This means I have to put off testing for a few days, but it also gives me time to look at the results that I have so far and plan the next set of tests. Today I worked on finding the uncertainties for all of my data and seeing how they compare to the theoretical Poisson-Boltzmann prediction. A few things bother me about the final fit that I came up with, which is seen above. First of all, PB theory would suggest that there should never be more than 1 total charge being compensated for, which there often is. Second, the eighth and tenth data points are disturbingly large. Third, the error bars for only the eighth and tenth points can be seen on the graph, meaning they are by far the largest errors. Fourth, the PB predicted curves shown on the graph as "Theoretical" had to be translated to fit that well on the graph. The Cohex curve had to be multiplied by a factor of 1.25, and the Mg curve had to be multiplied by a factor of 1.6. This means that my results are systematically higher than they "should" theoretically be. Also, I believe that once the new nitrogen comes and some maintenance is done to machine, combined with the new calibration standards I will make tomorrow, the results be more precise. This should help identify where the problems are coming from. Also, I should say that the third trial I ran, which is identical to the fourth I have yet to run, was prepared slightly differently and has already shown to be more accurate.
Friday, July 2, 2010
July 2nd

I spent most of today analyzing and writing up my results from the past few days. Some good news, is that the data sets are fairly consistent with each other. I graphed the charge that was contributed by both ions to compensating for the DNAs negative charge, and it actually appears to have a somewhat linear relationship. There are two points that do not fit the linear fit, the 8th point and the 10th. The 8th is somewhat disturbing, because it appears to be random. I originally thought I might have prepared the solution poorly, but now that I have run another differently prepared solution, I find that hard to believe. Who knows though, it is very possible it should be like that. The graph on the left is the average of the 3 data series that I have collected so far. It is also a little strange that there are often more than 1 total charge contributed by the sum of the Mg and Cohex, because DNA only has 1 negative charge per phosphate. Because the Mg and Cohex are normalized with the P concentration, there should never be more that 1 charge total. This suggests either some error, or some sort of overcharging. I am nearly done with the analysis paper I have been writing, and will most likely post it on here when it is finished. Next week I will be finishing analyzing this data, preparing the new calibration standard, and running as much more sample as possible.
July 1-2
Thursday was a pretty relaxed day as we waited for our DNA gels that shutdown over night to finish up. While we waited I read an paper on how Magnesium affects chromatin but it was a little dense and hard to understand so I'm still making my way through it. When we finally got our DNA gels and pictures of them we found that we had let them run too long and that the data we were looking for had run off the gels. But we had better looking gel than our first try so we are narrowing down our results and should get it the next time. Today I re-tested the old nucleosome samples to determine which one that we had was the best sample compared to our new DNA. after some confusion with the results I finally got the data and determined how much nucleosomes per gram are in the solution and how much we need in order to have a good comparison with our new DNA for the next time we run a gel.
New Gels, New Challenges
Note: I realize these posts may be confusing to those outside of biology/biochemistry fields. In general, gel electrophoresis separates molecules by size: In this case, biggest are at the top and smallest are at the bottom. For more, look at this great animated introduction.
As you remember from my last post, our last gel ran quite well, but the results showed that we had failed to digest our inter-nucleosome DNA. This time, we modified our digestion process (and by modify, I mean went back to the process I had been using before I decided to "improve" my process).
This time however, we have another issue. The gel itself gave us problems. There were a couple issues layered on top of one another, but the main one was that our power supply that runs the gel decided to quit some time in the middle of the night. This had two effects, one was that the DNA had time to diffuse and migrate in any old direction it wanted to during the time that the power supply was off. This causes a broadening of the bands which I think we are seeing here. Another issue was that it forced us, due to time considerations, to ramp up the voltage to very high values which I think is what caused the intense upside-down V-like shapes to the bottom of our gels. Finally, we ran the gel a little too long losing our 100bp marker. In the previous post, you could see the 100bp and 330bp markers, but I am pretty sure that the marker you see in the first lane is simply the 330bp marker. This makes it impossible to determine as, even though some of the middle markers are resolved, we have no way of counting up from the markers (each sub marker is 10bp).
As for the digestion itself, things look pretty good. We got rid of our smear of DNA and it is obvious that the DNA is migrating to approximately the correct place. There are only two issues I am worried about. One is that aside from the zero time point (the second lane), most of the lanes look the same. In other words, it seems as if we are completely digested by 5 minutes.
The second issue is that the lanes that do look different are completely random. The corresponding times are 20, 40, and 50 minutes. By 50 minutes, we shouldn't see anything above that band of brightness on the bottom. The fact that it is random seems to indicate a possible pipetting error. However, I ran and loaded two separate gels, so the pipetting error would have had to have come earlier. We'll try going over our process to make sure that this isn't an issue.
Other than that, it's back to do the exact same thing again. This time we'll be using a different power supply so we don't run into the same problems.
As you remember from my last post, our last gel ran quite well, but the results showed that we had failed to digest our inter-nucleosome DNA. This time, we modified our digestion process (and by modify, I mean went back to the process I had been using before I decided to "improve" my process).
This time however, we have another issue. The gel itself gave us problems. There were a couple issues layered on top of one another, but the main one was that our power supply that runs the gel decided to quit some time in the middle of the night. This had two effects, one was that the DNA had time to diffuse and migrate in any old direction it wanted to during the time that the power supply was off. This causes a broadening of the bands which I think we are seeing here. Another issue was that it forced us, due to time considerations, to ramp up the voltage to very high values which I think is what caused the intense upside-down V-like shapes to the bottom of our gels. Finally, we ran the gel a little too long losing our 100bp marker. In the previous post, you could see the 100bp and 330bp markers, but I am pretty sure that the marker you see in the first lane is simply the 330bp marker. This makes it impossible to determine as, even though some of the middle markers are resolved, we have no way of counting up from the markers (each sub marker is 10bp).As for the digestion itself, things look pretty good. We got rid of our smear of DNA and it is obvious that the DNA is migrating to approximately the correct place. There are only two issues I am worried about. One is that aside from the zero time point (the second lane), most of the lanes look the same. In other words, it seems as if we are completely digested by 5 minutes.
The second issue is that the lanes that do look different are completely random. The corresponding times are 20, 40, and 50 minutes. By 50 minutes, we shouldn't see anything above that band of brightness on the bottom. The fact that it is random seems to indicate a possible pipetting error. However, I ran and loaded two separate gels, so the pipetting error would have had to have come earlier. We'll try going over our process to make sure that this isn't an issue.
Other than that, it's back to do the exact same thing again. This time we'll be using a different power supply so we don't run into the same problems.
July 1st
Yesterday I began analyzing my results from the previous day's testing. The results seem to show a clear pattern, for as more Mg is added to the initial solution, more Mg is precipitated, suggesting it out competes the Cohex. In general though, as more Mg was added, less DNA is found in solution, suggesting that Mg does not precipitate the DNA nearly as well. I also began working on a report that shows my process and an overview of my results so far. I also prepared another set of samples that should be exactly the same as the ones I ran the last few days. Running these samples again should give me a data set large enough to get some good statistics for my results.
Thursday, July 1, 2010
June 30
Today I spent the day making new timed digestion samples that we could run in the DNA gels. After I finished the final bath that the samples take in 50 celcius I created 10X solutions with each of the time trials because last time we made a gel it was very bright which is an indication that there is too much DNA. We ran the DNA gels overnight and tomorrow we are going to dye them and see our results
Subscribe to:
Posts (Atom)
